For outdoor temperature from manual: Setting up the outdoor sensor-when you first set up your clock be sure to place the two AAA batteries into the outdoor sensor first before placing batteries into the clock. If you are going to be suing more than 1 sensor up to 3 then you must make sure tha each sensor is set to a different channel. Using the outdoor temperature feature-once you have placed the batteries in both the outddor sensors and clock, the clock will begin searching for the signal from the outddorsensor. It will seach all 3 channels automatically.
|Published (Last):||21 August 2018|
|PDF File Size:||5.12 Mb|
|ePub File Size:||6.42 Mb|
|Price:||Free* [*Free Regsitration Required]|
Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the [POWER] button on the operation panel. Operation Turn the main power switch to the " " position. The power indicator on the operation panel will blink in green. Turning off the power Turn off the power by pressing the [POWER] button, then turn the main power switch to the " " position.
Restarting the machine In order for some settings to take effect, the machine must be restarted. Restart the machine as instructed by the message on the touch panel turn off the power by pressing the [POWER] button and then press it again to turn on the power. When using the fax or Internet fax function, always keep the main power switch in the " " position. In order for some settings to take effect, the machine must be restarted.
In some states of the machine, restarting with the [POWER] button may not make the settings take effect. In this case, turn off the main power switch and then turn it on again. When turning off the main power switch, press the [POWER] button on the operation panel and then turn the main power switch to the " " position. In a sudden case of main power outage, turn the power for the machine back on and then turn it off in the correct order. If the machine is left for a long period of time with the main power having been turned off prior to the [POWER] button is turned off, abnormal noises, degraded image quality or other problems may result.
Turn off both the [POWER] button and the main power switch and unplug the power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or when you are moving the machine.
Shop Internationally at Sears
Sharp Lighted Alarm Clock SPC293 with Indoor Temp Display & Date